Anenji 12KW 48V Hybrid split-phase Solar Charge Inverter with WiFi CT Parallel Function
Inverter Manual：ANJ-12000W-LVP-WIFI User Manual
12000W 48V Hybrid split-phase Solar Charge Inverter
12KW Hybrid Solar Charge Inverter, split-phase design with 48V battery voltage and 120V/240V 50Hz/60Hz output.
AC charging current: 160A
MPPT charging current: 200A
PV input current: 22A × 2, voltage range 90V-450V (max open circuit voltage: 500V)
Supports up to 6 units in parallel for higher capacity or three-phase setups
Hybrid operation with anti-backflow for self-consumption and load management
Parallel models are available for flexible configurations, including three-phase systems.
| Type | ANJ-12KP-SP.WIFI |
| Parallel mode (function reserved) | |
| Allow quantity | 1~6 |
| Mains mode | |
| Nominal input voltage | 120(L1/N,L2/N)/240Vac(L1/L2) |
| Input voltage range | (85Vac~140Vac)+2% |
| Frequency | 50Hz/60Hz (Auto detection) |
| Frequency range | 47+0.3Hz~55+0.3Hz(50Hz);57+0.3Hz~65+0.3Hz(60Hz); |
| Max. efficiency | >95% |
| Converslon time (bypass and inverter) |
10ms(Typical value) |
| Max.bypass overload current | 2P，63A/63A(L1/L2) |
| Inverter mode | |
| Output voltage waveform | Pure sine wave |
| Nominal output power(VA)/(W) |
Split phase:12000VA/12000W Single phase: 7200VA/7200W(limited by the wiring terminals) |
| Power factor | 1 |
| Nominal output voltage (Vac) | 120Vac (L1/N, L2/N)/240Vac(L1/L2) |
| Output frequency range(Hz) | 50Hz±0.3Hz/60Hz+0.3Hz |
| MAX. efficiency | >91% |
| Overload protection |
(102% < load <110%) +5%: report error and turn off the output after 5 minutes; (110%< load <125%) + 5%: report error and turn off the output after 10 seconds; Load >125% +5%: report error and turn off the output after 5 seconds; |
| Peak power | Split phase:18000VA Single phase: 18000VA |
| Load motor capability | 6HP |
| Nominal battery input voltage | 51.2V (Minimum starting voltage 44V) |
| Battery voltage range | 40.0Vdc~58.6Vdc±0.6Vdc (Undervoltage alarm/shutdown voltage/overvoltagealarm /overvoltage recovery... settable on LCD screen) |
| Save power mode | Loads25W enter power-saving mode |
| Mains charge | |
| Battery type | Lead acid or lithium battery |
| Max. charge current (configurable) | 160A |
| Charge voltage range | 40-58.6Vdc |
| Max. PV open circuit voltage | 500Vdc |
| PV operate voltage range | 90Vdc~500Vdc |
| MPPT voltage range | 90Vdc~450Vdc |
| Battery voltage range | 40-58.6Vdc |
| Max. pV input power/current | 6000Wx2/22Ax2 |
| Charge current range (configurable) | 200A |
| Max. hybrid charge current (PV+AC) | |
| Max. hybrid charge current(confgurable) | 0-220A |
| Safety certification | UL STD.1741 |
| EMC certifcation level | FCC part15, CLASS B |
| Operate temperature range | -10'C to 55°C(>45'C derating) |
| Storage temperature range | -25'C~60'C |
| Humidity range | 5% to 95%(Three anti-paint protection) |
| Noise | s60dB |
| Cooling | Forced air cooling, adjustable wind speed |
| Communicate | USB/RS485(/WiFi/GPRS)/ Dry node control |
| Dimensions(L*W*D) | 620mm*450mm*132mm |
| Weight (kg) | 23.8 |
Maximize energyuse and lower your electricity costs
Built-in TWO 200A MPPT
Dual-Channel MPPT
with an efficiency of up to 98%
